Pianos regularly make movers yearly list of products that are most regularly harmed. Grand pianos are particularly troublesome. Practicing the following treatments for taking apart, padding and loading grand pianos will avoid damage, lower claims expense, and improve consumer satisfaction.
1) A minimum of three individuals are required to deal with a baby grand piano. If the child grand piano requires to increase or down stairs or if a full or concert grand piano requires to be transferred, a minimum of four individuals are needed.
2) Constantly complete a accurate and extensive stock. It may be essential or preferable to use a visual stock to adequately explain and reveal pre-existing damage.
3) As different parts are disassembled, please location all hardware in a correctly identified parts bag and after that put the parts bag in a "Components Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by eliminating the hinge pins. Have someone wiggle the lid, holding it opposite the hinge, while a 2nd individual works the pin loose. Please beware not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little fabric to assist avoid damage to the wood if required. Wrap the lid in a tidy furnishings pad.
6) Eliminate the prop that holds the cover open and wrap it in a tidy furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Get rid of the pedal assembly and wrap it in a clean furniture pad. The braces at the rear of the assembly rest in slots at each end. When eliminating the screws, please beware not to drop the braces. In addition, please be particularly cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please usage properly labeled parts bags for this purpose. When reassembling at location, please make sure to put the rods in the right order so that the pedals will work effectively.
8) Pad the piano by positioning a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you manage the piano. Cover the top of the piano with 2 tidy furniture pads, neatly folded around the keyboard. Usage rubber bands to secure the pads. Note: Please guarantee that the surface of the piano is dust-free prior to padding it. Padding an extremely refined surface area that is dusty may cause great scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is prepared to get the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Get rid of the left front leg by placing one person underneath the piano at the left end of the keyboard. Be sure to have 2 individuals lifting the corner of the piano while the 3rd individual eliminates the leg. Note: Please be sure to keep in mind which legs were gotten rid of from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please make certain to lift the whole piano somewhat while completing this maneuver navigate to this website to prevent excessive pressure on the remaining, attached legs as the piano tips. Raise the piano to an upright position on the board. Keep in mind: Please guarantee that the soundboard is secure prior to lifting. Make sure that the piano is focused snugly versus the brace at the end of the piano board. Keep in mind: Never leave the piano unattended. Constantly have at least a single person holding the piano consistent at all times.
12) Eliminate the two remaining legs and wrap them in tidy furniture pads. These legs are held in place by a "essential and slot" plan. To get rid of the leg, Source slide it inward towards the center of the piano till it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and securing them. Place folded burlap pads over the furniture pads but under the straps to offer additional protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for defense against home damage, place the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to prevent the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to pack the padded cover is between the piano and the preceding tier or in between the wall and the piano.
Although grand pianos represent a substantial difficulty, they can be moved find more info without damage by using sound judgment and practicing the procedures listed above.